Filter
Top Products
If all computers are using the same protocol(s) and Workgroup name, and
Windows 95 computers can't see Windows 98 computers, enable NetBIOS on
all the computers using Windows 95 and 98.
IPX/SPX-compatible Protocol should be installed on all computers.
Bring up the properties of the IPX/SPX-compatible Protocol. To do this, click
on Start, Settings, Control Panel, then open Network and click on the
Configuration tab. Highlight IPX/SPX-compatible Protocol (only one of them)
and click on Properties.
Click on the NetBIOS tab. Put a check next to I want to enable NetBIOS over
IPX/SPX and click OK. Click OK again.
After Windows finishes copying the appropriate files, restart your computer.
When you’ve returned to the desktop, open Network Neighborhood and look
for the other PCs on your network.
page 40