Filter
Top Products
Mode Selection
You can set the HomeLink Phoneline + 10/100 Network PC Card to default to
either a 10BaseT connection or Phoneline connection. Since there are three
ports, the card is set to Auto Detect an active connection. Auto Detect will
look first for a connection on the 10BaseT port, and if one is not found, the
card will default to the Phoneline connection.
You can configure the card to use only one connection type.
• 10/100 Ethernet (External) mode will force the card to use a 10/100
connection if one is present.
• 10BaseT Ethernet (Internal) mode will force the card to use a 10Mbps
connection if one is present.
• Phoneline mode will force the card to use only the 1Mbps Phoneline
connection.
page 34