Filter
Top Products
7. Click the “Protocols” tab under the “Network” window and check for all
protocols you need for the HomeLink Card. Click Add and OK to add proto-
cols.
8. Click the “Services” tab under the “Network” window and check that you
have all necessary services for the HomeLink Card. Click Add and OK to
add items, and click Close when you are finished.
9. Windows NT may tell you that it needs to copy some NT system files onto
your hard drive. If so, remove the Linksys HomeLink CD from your CD-
ROM drive and insert your NT installation CD-ROM. Type D:\i386 in the
field and click Continue.
In the following steps (8, 9, 11, and 13), if you are not sure how to set
up your protocols, services, DHCP, or bindings, please consult your net-
work administrator or your NT 4.0 documentation.
Phoneline Network Card & Network in a Box
25
The “Select OEM Option” window, shown below, will appear.
5. A window will confirm that the Linksys HomeLink Phoneline Network
Adapter has been detected. Click OK, and NT will then copy some files to
your PC.
6. The Setup Wizard window reappears with the HomeLink Card now listed
in the “Network” window under the “Adapters” tab, as shown below.
Linksys HomeLink Series
24