Filter
Top Products
91
Chapter 5: Using the Web-based Utility for Configuration
Admin Tab - Firmware Upgrade
WebView Switches
Admin Tab - Firmware Upgrade
After you download a new image file, the device should be rebooted. If you are downloading a new boot image,
please follow these steps:
1. Download the new boot code. DO NOT RESET THE DEVICE!
2. Download the new software image.
3. Reset the device now.
The Firmware Upgrade screen contains the following fields:
via TFTP. Defines the upgrade through a TFTP Server.
via HTTP. Allows you to upgrade the firmware using your Web browser.
Upgrade. Defines the screen functionality as a Firmware upgrade.
Backup. Defines the screen functionality as a Firmware backup.
TFTP Server IP Address. Specifies the TFTP Server IP Address from which files are downloaded.
Source File Name. Specifies the file to be downloaded.
Destination File name. Specifies the destination file type to which to the file is downloaded. The possible field
values are:
Software Image. Downloads the Image file.
Boot Code. Downloads the Boot file.
Admin Tab - Reboot
The Reboot screen resets the device. The device configuration is automatically saved before the device is
rebooted.
Figure 5-70: Admin - Firmware Upgrade
Figure 5-71: Admin - Reboot