Filter
Top Products
41
Chapter 5: Using the Web-based Utility for Configuration
VLAN Management Tab - Create VLAN
WebView Switches
VLAN Management Tab - Create VLAN
The Create VLAN screen provides information and global parameters for configuring and working with VLANs.
Single VLAN
VLAN ID (2-4094). Indicates the ID number of the VLAN being configured. Up to 256 VLANs can be created. This
field is used to add VLANs one at a time. To add the defined VLAN ID number, press the Add button.
VLAN Name. Displays the user-defined VLAN name.
VLAN Range
VLAN Range. Indicates a range of VLANs being configured. To add the defined range of VLAN ID numbers, press
the Add Range button.
VLAN Table
The VLAN Table displays a list of all configured VLANs. The VLAN ID, VLAN Name, and status of the VLAN are
displayed here. To remove a VLAN, click the Remove button.
VLAN Management Tab - Port Setting
The VLAN Port Setting screen provides parameters for managing ports that are part of a VLAN. The port default
VLAN ID (PVID) is configured on the VLAN Port Setting screen. All untagged packets arriving to the device are
tagged by the ports PVID.
Port. The port number included in the VLAN.
Mode. Indicates the port mode. Possible values are:
• General. The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q
mode).
• Access. The port belongs to a single untagged VLAN. When a port is in Access mode, the packet types
which are accepted on the port (packet type) cannot be designated. It is also not possible to enable/
disable ingress filtering on an access port.
• Trunk. The port belongs to VLANs in which all ports are tagged (except for an optional single native VLAN).
Figure 5-10: VLAN Management - Create VLAN
NOTE: VLANs that are created dynamically using
GVRP are assigned a VLAN name “Undefined”.
Figure 5-11: VLAN Management - Port Settings