Filter
Top Products
43
Wireless-G Cable Gateway
Select the MAC Address from the list, click the Select button , and click the
Add button. Click the Refresh button if you want to refresh the screen. Click
the Close button to return to the previous screen. When you return to the Timed
Access screen, the MAC Address will appear in the fields. Select a filter from
the drop-down list, if desired, then click either the Add button, or the Remove
button, as appropriate.
Day to Block. You can select Everyday or specified days to block or allow.
Time to Block. You can select All day, or a range of time.
42
Filter Internet Traffic
This screen is used to filter Internet traffic by IP Address Range or by Port
Range.
Filtering Rules. You can filter by IP Address Range or Port Range.
IP Address Range
To set up a filter using IP addresses, enter the range of IP addresses you wish
to filter in the Start and End fields. Users who have filtered IP addresses will
not be able to access the Internet at all. If you only want to filter one IP address
instead of a range of IP addresses, enter the same value into both fields. For
instance, if you wish to filter the PC with the IP address of 192.168.0.5, enter
5 into both fields on one line: 192.168.0.5 ~ 192.168.0.5.
Port Range
To filter users by network port number, select the protocol you want to filter,
TCP, UDP, or Both, in the Protocol drop-down box. Enter the port numbers
you want to filter in the Start and End fields. Users connected to the Router
will no longer be able to access any port number listed there.
When finished making your changes on this tab, click the Save Settings but-
ton to save these changes, or click the Cancel Changes button to undo your
changes.
Figure 5-16
Figure 5-15