Filter
Top Products
Diagnostics
This screen allows you to run a Ping Test to determine if an IP Address is
online.
Ping Test
Ping Target. Enter the IP Address that you want to ping in the field.
No. of Pings. Enter the number of times that you want to ping.
Ping Size. Enter the size of the ping to send.
Ping Interval. Enter the Ping Interval in Milliseconds.
Ping Timeout. Enter the Timeout in Milliseconds.
Click the Start Test button to start the Ping Test. Click the Abort Test button
to stop the test.
Click the Refresh button to refresh the screen and view the test results. Click
the Clear Result button to remove the results from the test that are displayed
in the window.
49
Wireless-G Cable Gateway
48
Figure 5-22
The Administration tabs contain Security, Diagnostics, and Advanced
Administration screens.
Security
Security. To change your password, enter the Gateway Password in the (Enter
New Password) field, then re-enter it in the (Re-enter To Confirm) field.
Reporting
E-mail Alerts. Click Enable to allow alerts.
Your Email Address. Enter the E-mail adress that the alerts will be sent to.
Your SMTP Server Name. Enter the name of your SMTP server in the field.
Logs
The log with the description, count, last occurrence, target, and source of the
alert can be viewed here. To send the E-mail Log, click the E-mail Log button.
To clear the log, click the Clear Log button.
When finished making your changes on this tab, click the Save Settings button
to save these changes, or click the Cancel Changes button to undo your
changes.
Figure 5-21
The Administration Tabs