Filter
Top Products
Linksys HomeLink™ Series
Connecting to an Ethernet or Fast Ethernet Network
1. Attach one end of an Ethernet cable into the USB Network Adapter’s
LAN 10/100 port.
2. Plug the other end of the cable into a Ethernet or Fast Ethernet hub,
switch, or router. If you plan to use both 10BaseT and 100Mbps network
segments on the same network, you'll need a dual-speed hub or switch
that allows segments of different speeds to communicate. For more infor-
mation on 10/100 dual-speed hubs and switches, visit the Linksys web
site at www.linksys.com.
Your computer is now connected to your Ethernet or Fast Ethernet net-
work.
• If your computer runs Windows 98, go to page 9 now for driver installa-
tion instructions.
• If your computer runs Windows 2000, go to page 20 now.
8
usb100h1 April 2000.qxd 4/4/00 11:15 AM Page 8