Filter
Top Products
Phoneline + 10/100 USB Network Adapter
27
Novell NetWare 3.x Client Setup for Windows 98
The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 98 PC.
1. Follow the Windows 98 setup instructions.
2. Start up Windows 98. Click on Start, Settings, then Control Panel.
Double-click on Network. The Network window appears. Click on the
Configuration tab.
3. In the Primary Logon Box, choose Client for NetWare Networks. If you
don’t see this option, refer to page 34 to install this component.
4. Under the The following network components are installed box, highlight
Client for NetWare Networks and click on the Properties button.
5. The Client for NetWare Networks Properties window appears. Under the
General tab, enter the name of your network’s Preferred Server. Assign the
First Network Drive Letter; the default is F. Make sure the Enable logon
script processing is checked.
6. Click OK. Click on the Access Control tab. Make sure the Share-level
access control option is selected; do not select User-level access control.
7. When you’re done, click OK to restart your computer.
The NetWare Client portion of your Windows setup is complete.
usb100h1 April 2000.qxd 4/4/00 11:17 AM Page 27