Filter
Top Products
Linksys HomeLink™ Series
12
8. Windows will finish installing the software onto your PC. Click Finish.
9. When asked if you want to restart your PC, remove the Program Disk and
click Ye s . If you are using the Windows CD-ROM, leave it in your PC.
You may need it later. If Windows does not ask you to restart your PC,
click the Start button. Choose Shut Down, choose Restart, then click
Ye s .
The Windows 98 driver installation is complete. Please continue on to the
next section, which will provide instructions for configuring Windows
98’s network protocol. Consult your network administrator for your net-
work configuration information if necessary.
NNoottee::
From this point on, you must provide Windows with a User Name
and Password every time you are prompted to do so. Remember to click
OOKK
to properly log into Windows. If you click
CCaanncceell
or hit the
EEssccaappee
[[EESSCC]]
key, you will not log into the network.
usb100h1 April 2000.qxd 4/4/00 11:16 AM Page 12