Filter
Top Products
Danish Interpretation Systems Technical Specifications
Printed in Denmark
34
AUDIO_STATUS_MU_SPEAKER_OFF
Command item value: 4
Message format:
<START> 'c' <ID> <MSB addr> <LSB addr> <29> <1> <4> <CRC> <STOP>
The CU sends this message when the speakers on the delegate microphones are switched off.
AUDIO_STATUS_MU_LINEOUT_VOLUME
Command item value: 5
Message format:
<START> 'c' <ID> <MSB addr> <LSB addr> <29> <2> <5> <Gain Level> <CRC> <STOP>
This message signifies that the gain setting of amplifier 5 have been changed to Gain Level dB. A
setting of –41dB means the amplifier is switched off.
AUDIO_STATUS_MU_MIC_TO_SPEAKER
Command item value: 6
Message format:
<START> 'c' <ID> <MSB addr> <LSB addr> <29> <2> <6> <Gain Level> <CRC> <STOP>
This message signifies that the gain setting of amplifier 2 have been changed to Gain Level dB. A
setting of –41dB means the amplifier is switched off.
AUDIO_STATUS_MU_MIC_TO_LINEOUT
Command item value: 7
Message format:
<START> 'c' <ID> <MSB addr> <LSB addr> <29> <2> <7> <Gain Level> <CRC> <STOP>
This message signifies that the gain setting of amplifier 1 have been changed to Gain Level dB. A
setting of –41dB means the amplifier is switched off.
AUDIO_STATUS_MU_LINEIN_TO_SPEAKER
Command item value: 8
Message format:
<START> 'c' <ID> <MSB addr> <LSB addr> <29> <2> <8> <Gain Level> <CRC> <STOP>
This message signifies that the gain setting of amplifier 8 have been changed to Gain Level dB. A
setting of –41dB means the amplifier is switched off.