Filter
Top Products
Chapter 3: Creating Mirrored Volumes | Creating Mirrored Volumes SAS2 Integrated RAID Solution User Guide
Page 16 LSI Corporation Confidential
| August 2010
4. Move the cursor to the RAID Disk column and select a line that has a No entry in this
column, which indicates that the disk is not already part of the volume you are
creating. To add the disk to the new array, change the No to Yes by pressing the
space bar.
CAUTION: The SAS2 BIOS CU deletes all existing data from the disks drives when you
select them to use for a mirrored volume.
5. Move the cursor to another line and press the space bar to add another disk to
the array.
If you select an odd number of disks, the SAS2 BIOS CU creates an Integrated
Mirroring Enhanced array. If you select an even number of disks, it creates an
Integrated Mirroring + Striping array. As you add disks, the Array Size field changes
to reflect the size of the new array.
6. Press C to create the array.
A menu window appears.
7. From the menu options, select Save changes then exit this menu.
A processing message appears briefly, and then the SAS2 BIOS CU returns to the
Adapter Properties window. Initialization of the new array continues in the
background.
NOTE: To create a second Integrated Mirroring Enhanced or Integrated Mirroring +
Striping volume, repeat the instructions above.
NOTE: See the instructions in Section 3.3, Managing Hot Spare Disks, if you want to
create one or two global hot spares.
3.2.3 Expanding an Integrated
Mirroring Volume with OCE
You can use the online capacity expansion (OCE) feature to expand the capacity of a
two-disk Integrated Mirroring (RAID 1) volume by replacing the original disks with two
higher-capacity disk drives while the volume remains online. This process maintains
data integrity at all times, even if one of the disks fails during the replacement process.
The new disks must have at least 50 GB more capacity than the disks they are replacing,
and they must use the same protocol (SAS or SATA) as the disks they are replacing.
Follow these steps to expand an existing RAID1 volume with OCE:
1. Physically replace one of the two volume disk drives with a drive that has at least
50 GB more capacity.
If necessary, you can identify the disks in the volume by following the instructions in
Section 3.4.5, Locating Disk Drives in a Volume.
2. Wait until synchronization completes on the new disk and the volume returns to the
Optimal state, as indicated in the Adapter Properties window of the SAS2 BIOS CU.
3. Physically replace the other volume disk drive with a drive that has at least 50 GB
more capacity.