Filter
Top Products
Appendix A: | Commands SAS2 Integrated RAID Solution User Guide
Page 36 LSI Corporation Confidential
| August 2010
Sample Output Following is a sample of the information that the DISPLAY command returns.
Read configuration has been initiated for controller 0
------------------------------------------------------------
Controller information
------------------------------------------------------------
Controller type : SAS2008
BIOS version : 7.00.02.00
Firmware version : 00.250.19.0
Channel description : 1 Serial Attached
SCSI
Initiator ID : 112
Maximum physical devices : 62
Concurrent commands supported : 266
Slot : 3
Segment : 0
Bus : 64
Device : 1
Function : 0
RAID Support : Yes
------------------------------------------------------------
IR Volume information
------------------------------------------------------------
------------------------------------------------------------
Physical device information
------------------------------------------------------------
Initiator at ID #112
Device at ID #335524
Device is a Hard disk
Enclosure # : 2
Slot # : 2
Connector ID : 4
State : Ready (RDY)
Size (in MB)/(in sectors) : 70007/143374738
Manufacturer : HP
Model Number : DG072A9BB7
Firmware Revision : HPD0
Serial No : B365P720H7330709
Protocol : SAS
Drive Type : SAS
------------------------------------------------------------
Enclosure information
------------------------------------------------------------
Enclosure# : 1
Logical ID : 51234567:89012345
Numslots : 8
StartSlot : 0