Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 19
PPP and Telnet
NOTES:
• A Telnet session to the serial port via PPP may time out during attempts to transfer
large files, such as executable images, to a TFTP server over the same link. However,
the file transfer is not terminated. An in-progress TFTP file transfer continues and
ends only after the file transfer is completed.
• File transfer via TFTP over PPP links may terminate before completion if the dialin
PC is used TFTP server.
• A new baud rate may take effect before the current PPP connection is terminated if
the relevant baud rate change command is entered more than once resulting in
termination of PPP connection. This requires re-establishment of a PPP connection.
Time Zones
Problem: The System Clock may be incorrect after an upgrade to 4.0.
Workaround: Check the System Clock and reset it, if necessary. For information about
resetting the System Clock, refer to the Cajun P550/P220 Switch Operations Guide.
Problem: To support SNTP, the internal clock was changed from local time to GMT. The
System Clock is now displayed by converting the internal representation (GMT) to local
time by accounting for time-zone and summer-time hour configurations.
An upgrade routine has been added that changes the System Clock for all switches
running 3.0 or higher, given the following assumptions:
• The switch is running Release 3.x,
• The time-zone is set properly in the 3.x image, and
• The time-zone defined supports the North American Daylight Savings Time rules.
If any of these assumptions are false, the System Clock will be incorrect.
Workaround: Check the System Clock and reset it, if necessary. For information about
resetting the System Clock, refer to the Cajun P550/P220 Switch Operations Guide.