Lucent Technologies P220 Network Card User Manual


 
Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 34
OSPF Commands
Table1-11 shows new and changed OSPF Commands in Release 4.0.1:
To Enable:
logging shutdown size
{16|32|64|128}
To Disable:
[no] logging shutdown
size {16|32|64|128}
To Enable:
N/A
To Disable:
[no] logging shutdown
size
Please note the change to the no form
of the command.
To Enable:
logging traps
[{start|system|config|
temp|resource|
fan|service_port|user_
port|auth_failure|
bridge_stat|switch_fab
ric|protocol}]
To Disable:
[no] logging traps
[{start|system|config|
temp|
resource|fan|service_p
ort|user_port|auth_fai
lure|
bridge_stat|switch_fab
ric|protocol}]
To Enable:
N/A
To Disable:
[no] logging traps
Please note the change to the no form
of the command.
Table 1-11: OSPF Commands
Old Command New Command New Definition/Argument
To Enable:
ip ospf
authentication-key
<password>
To Disable:
[no] ip ospf
authentication-key
N/A System Supported: P550R
show ip ospf interface
[<interface-name>]
N/A System Supported: P550R
show ip ospf virtual-
links
N/A System Supported: P550R
Table 1-10: Logging Commands (Continued)
Old Command New Command New Definition/Argument