Filter
Top Products
Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1 36
N/A ip access-list -
Continued from previous
page
The range operator requires two port
numbers. All other operators require
one port number.
• port – the decimal number or
name of a TCP or UDP port. A port
number is a number from 0 to
65535.
• established – for the TCP
protocol only. Indicates an
established connection. A match
occurs if the TCP datagram has the
ACK or RST bits set. The
nonmatching case is that of the
initial TCP datagram to form a
connection.
N/A show [ip] access-group Display the current IP access group.
Command Mode: User
System Supported: P550R
show ip access-lists
[<access-list-name>]
show [ip] access-lists
[<access-list-name>]
The command description is
unchanged.
Table 1-12: Policy Commands (Continued)
Old Command New Command New Definition/Argument