Mamiya 6MF Power Supply User Manual


 
[Battery check]
1.
Power can be turned on/off with the
small lever beside the shutter release button.
(ON) Align the white dot on the lever with
the white dot on the camera body.
(OFF) Align the white dot on the lever with
the red dot on the camera body.
2.
When the power is turned ON and the
shutter release button is touched slightly,
the shutter speed is indicated on the left
side of the viewfinder and a red LED indi-
cator lights on the upper right side indicating
that power is normal.
l
When battery power drops below normal. or
when the batteries have been inserted improperly.
the shutter
speed
does not show and the red LED
does not light
.
* When the shutter release button is lightly touched.
CAUTION:
l
Be sure to confirm proper polarity of the bat-
teries before inserting them.
l
Do not contaminate the battery surface with oil.
sweat. or other foreign matter. Failure to
insert
clean batteries could result in
poor
electrical
contact.
When contaminated, carefully wipe with a dry
cloth, or clean lens tissue.
*
After the camera has been used for many hours
of photographing. or has been inactive for a long
time,
insert
new batteries.
*When the camera is used in low temperatures,
battery performance deteriorates: below 0%.
use new batteries as needed.
[Spare batteries]
Can be stored inside the body
cap.
If the power
on/off
lever is left ON, the LED
lights up when the
shutter
release button is
pressed,
resulting
in early
battery
depletion.
Be sure to keep the
on/off lever OFF.
12