Filter
Top Products
Uniquely designed to prevent mistakes, the New Mamiya 6
incorporates numerous safety features.
If the shutter will not function, it is very likely due to user
error rather than camera malfunction. Should something
appear to go wrong, be sure to review the following points.
0
When the shutter will not function.
@
Is the power on/off lever set to the ON position?
@
Has the film been completely advanced to the
next
frame?
Have all the exposures already been made (12 with
120, 24 with
220)?
@
Has the film advance lever been wound until it stops?
@
Is the lens mount retracted?
@
Is the light shield curtain closed?
(In the case of examples
0
-
0,
the red LED will
flash a warning on the upper right side of the view-
finder.
0
When the lens cannot be removed:
0
Is the light shield curtain open?
@
Is the lens mount retracted or stored in the body?
0
Be
sure to use new batteries.
*
Expose the camera to cold air only when in use.
t
Batteries
which will not
function
at low temperatures may be used when
returned
to
use at normal temperatures.
Avoid quick heating or cooling as unstable voltage may result.
An automatic circuit will signal battery depletion.
When the shutter release button is touched slightly, an LED
blinks to indicate a suitable shutter speed. A few exposures can
be made, but replace the batteries as soon as possible.
When the batteries are depleted, the LED ceases to light and
the shutter cannot be released.
l Replace both batteries at the same time. Avoid using old
batteries with new ones, and avoid mixing different types
of batteries.
*
When inserting batteries in the battery chamber, verify correct
polarity. If contaminated with oil, sweat or other foreign matter,
be sure to wipe clean with a dry cloth or lens tissue.
33