Filter
Top Products
ALLOFF
SINGLE
R
AUDIO OUT
L
STEREO
FLAT
-20dB0dB
MIC ATTEN
REPEAT
EDL PLAY
ON
OFF
MANUALALC
LIMITER
LEVEL CONT.
ANC
INPUT LOCK
ONOFF
PRE REC
ONOFF
MONITOR
FILESOURCE
EDIT
INPUT A-B REPEAT
MARK
7
OFF
ON
INPUT LOCK
a
8
9
10
When power is on and the PMD671 is in REC/
PAUSE the recorder is constantly saving about 4
seconds* of audio input. This is called pre record
cache. When recording is resumed from REC
PAUSE by sliding the REC switch, the pre-
recorded seconds are recorded.
OFF: Turns the pre-record cache off.
ON: Leaves the pre-record cache on.
*Cache time varies with recording conditions:
• 24-bit PCM – 1 second
• 16-bit PCM, MP2, MP3 – 4 seconds
• 16-bit PCM, MP3 with RAW – 2 seconds.
Factory default: PRE REC switch at ON.
OFF ON
PRE REC
6
- 15 -
MIC ATTEN
0dB
-20dB
7. INPUT LOCK switch
The INPUT LOCK switch
lets you lock your selected
input settings with a switch
covered by the Security
cover.
OFF: When the INPUT LOCK switch is at OFF,
push and release the INPUT button (a) to tab
through the input choices. The selection “times
out” to the displayed input choice in 3 seconds.
Example
display
MIC
ON: When the INPUT LOCK switch is at ON,
pushing the INPUT button (a) does nothing
(skips the input selection choices).
Factory default: INPUT LOCK switch at OFF.
8. AUDIO OUT switch
This switch selects the audio
output channel for playback.
Applies to playback output to LINE OUT, DIGITAL
OUT, and Internal speaker or headphones.
L: Audio recorded on the Left channel is output to
both the left and right output channels.
STEREO: Audio recorded on the Left channel is
output to the left output channel, and audio
recorded on the Right channel is output to the
right output channel. Both channels are output to
the internal speaker.
R: Audio recorded on the Right stereo channel is
output to both the left and right output channels.
Factory default: ANALOG OUT switch at STE-
REO.
9. MIC ATTEN switch
The microphone attenuation
switch permits the direct use
of microphones that differ in
sensitivity.
0dB: No microphone attenuation.
-20dB: Input from a microphone(s) connected to
the XLR MIC IN jacks is cut by -20dB.
Factory default: MIC ATTEN switch at 0dB.
R
AUDIO OUT
L
STEREO
MIC
-dB
00 40 20 12 6 2 0 over
-dB
R
L
REMAINREC
TIME
6. PRE REC switch
This switch lets you turn
off pre record cache if it
is not desired.
SINGLE
OFF ALL
REPEAT
10. REPEAT switch
Lets you endlessly repeat
playback of a track or entire
memory card.
OFF: No repeat.
SINGLE: During playback, the current track is
repeated. When playback reaches the end of the
track, it automatically starts playback from the
beginning of that track.
ALL: During playback, all tracks are repeated.
When playback reaches the end of the last track,
it automatically starts playback from the beginning
of the first track.
Factory default: REPEAT switch at OFF.
Note:
For other methods of repeat playback, see the A-B REPEAT
button and/or EDL A-B looping (pages 18 and 19).