Filter
Top Products
-dB
-dB
-dB
-dB
-dB
-dB
-dB
-dB
- 41 -
How to set or change SilentSkp continued
Default settings are Off, 03 seconds and -40 dB.
How to set or change SilentSkp
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Double Click ENTER
.................. RecFormat
Press F.FWD/+
until ...................... SilentSkp
Press ENTER
............................... Off/On/TR
Press F.FWD/+
....................... tab Off/On/TR
Press ENTER
.................................. seconds
Press F.FWD/+
.......................... tab seconds
Press ENTER
.................................. decibels
Press F.FWD/+
.......................... tab decibels
Press ENTER
................................ SilentSkp
Press
MENU/STORE .................... store & exit
button for about 2 seconds.
2. With Preset
flashing in the
display, double
click the ENTER button
.
3. Press and release the F.FWD/+ button
until SilentSkp is
displayed.
4. With SilentSkp
flashing, press
and release the
ENTER button
.
On/Off/TR menu choice is flashing.
5. Press and re-
lease the F.FWD/
+ button
to
tab between On, Off and TR.
6. When correct,
press and
release the
ENTER button
. Seconds choice is flash-
ing.
7. Press and re-
lease the F.FWD/
+ button
to
tab through seconds.
8. When correct, press and release the ENTER
button
.
Decibel choice
flashing.
9. Press and re-
lease the F.FWD/
+ button
to
SilentSkp flashing.
You can:
• Press and release the F.FWD/+ button
or the -/
F.REV button to tab to another menu choice, or
• Press and release the
MENU/STORE button to
write the menu changes and return to stop mode, or
• Press and release the CANCEL button
to cancel all
menu changes and return to stop mode.
tab through decibel choices.
button
.
The display
returns to
10. When correct, press and release the ENTER
1. From stop, press
and hold the
MENU/STORE
Auto Cue
Auto Cue skips the silence at the beginning of an
audio track and pauses playback at the point
where the audio begins (sound is loud enough for
long enough). You can adjust how loud (dB's) and
how long (milliseconds) the audio has to be
before playback is cued.
If Single Play is selected, Auto Cue pauses
playback and cues to the sound of the next track
when the end of the track is reached.
The Auto Cue Menu settings permit:
• turning Auto Cue On or Off.
• adjusting the millisecond period in 5 millisec-
ond intervals from 5 to 95 milliseconds.
• adjusting the margin sound level that defines
where audio begins in -5 dB increments from
-20 to -60 dB.
Note
If you don't want to change the seconds or dB settings press
and release the ENTER button
several times to tab to
SilentSkp flashing.
Default settings are Off, 20 milliseconds, and -40
dB.