Filter
Top Products
- 18 -
ALLOFF
SINGLE
R
AUDIO OUT
L
STEREO
FLAT
-20dB0dB
MIC ATTEN
REPEAT
EDL PLAY
ON
OFF
MANUALALC
LIMITER
LEVEL CONT.
ANC
INPUT LOCK
ONOFF
PRE REC
ONOFF
MONITOR
FILESOURCE
EDIT
INPUT A-B REPEAT
MARK
15 16 17 18
A-B REPEAT
A
TRACK
TIMETRACK
-dB
00
40
20 12
62
0
over
-dB
R
L
A-
A-B
TRACK
TIMETRACK
-dB
00 40 20 12 6 2 0 over
-dB
R
L
A-B
15. A-B REPEAT button
While in playback, press and
release to start point A to point
B repeat playback.
A-B Repeat playback
Point A (starting point) is set when the A-B RE-
PEAT button is pressed and released. The next
press and release sets point B (ending point).
Playback repeats between A and B.
Note:
You can use the -/F.REV or F.FWD/+ buttons
between setting the A and B points.
You cannot use the TRACK JUMP forward or reverse
buttons.
You can pause during A-B repeat playback by
pressing and releasing the PLAY/PAUSE button
. Resume A-B playback by pressing the
PLAY/PAUSE button
again.
Exit and cancel A-B repeat by pressing the STOP
button
or pressing the A-B REPEAT button.
Example display
when an A point
has been set.
Example display
during A-B repeat.
Note:
For other methods of repeat playback, see the REPEAT
switch and/or EDL A-B looping.
MARK
EDIT
MARK
TIMETRACK
-dB
00
40
20 12
62
0
over
-dB
R
L
16, 17, 18. MARK/
EDIT buttons
This button group
controls EDL Marks and Editing functions.
EDL Marks
Mark functions: manually adding and locating
Marks.
Adding EDL Marks
Press and release the MARK/
EDIT button
during pause, recording, or playback to add an
EDL Mark. During recording, adding an EDL
Mark introduces an audible click in the recording
when using the internal microphone.
Locating EDL Marks
From Stop, press and release the Mark forward
button (18) or Mark reverse button (16) to tab
through the EDL marks on the CF card.
Example display.
EDL Mark location as recording time
from the beginning of the track.
EDL Mark
number
EDL Mark type
MARK dis-
played (instead
of TRACK)
To start playback from the displayed EDL Mark,
press and release the PLAY/PAUSE button
.