Filter
Top Products
LTRx-512 Installation and User’s Guide
29
[B]=Communications (LTR8-512 and LTR8-512M Only)
This function requires the administrator password
Use this function if you use LTR MasterLink or Terminal Manager software with your LTR8-512
You cannot choose function [B] directly. To enter Communications, press [#][9][0][0][#]
Use this function to enter the data transmission speed and terminal ID#
You must enter these same settings for your LTR8-512 in the LTR MasterLink software
You can see your terminal ID# and baud rate by using the “Quick Check” command [*] when the LTR8-
512 is in Clock Mode
[C]=Change Password
Use this function to change the default user password (000000) to a unique 6-digit number to prevent
unauthorized access to the LTRx-512’s programming functions. You should keep a copy of this
password in a safe place
You cannot choose function [C] directly. To start the Change Password function, enter your current
password, then press [#][9][0][0][0][#]
NEW PASSWORD 000000
To keep your old password, press [*] to cancel
To change the password, enter a 6-digit number, then press [#]. You will see
PRESS [#] IF CORRECT
Press [#] to accept, or press [*] to cancel and try again
Once you change your password, your LTRx-512 will no longer accept the old password
You can always change your password again if needed