Filter
Top Products
2.2.11. Removing the MODEM
Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.8.
first.
1. Remove the 2 screws (O).
Screw (O):DXQT2+D25FNL(N8)
2. Remove the MODEM from main board connector (CN18)
as vertical.
Screw (O)Screw (O)
CN18
Modem
2.2.12. Removing the Card Bus Ejector
Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.8.
first.
1. Remove the 1 screw (P) from connection side of wireless
LAN.
Screw(P):DFHE5025XA(N1)
Main Board
Screw(P)
2. Turn to the card bus ejector side.
3. Remove the 2 hooks (C) from the connector (CN14).
Main Board
Card Bus Ejector
Hook(C)
CN14
2-7