Filter
Top Products
3. Screw tightening of bottom case (2)
The keyboard is inserted, and after tightening of the screw, the keyboard hooks are inserted in order of the following.
3-1. DXQT2+E12FNL(B:N11) is tightened. No.1 to No.4
3-2. DXQT2+D4FNL(F:N9) is tightened. No.5
3-3. DXQT2+E10FNL(E:N10) is tightened. No.6
3-4. DFHE5035ZA(H:N2) is tightened. No.7
3-5. DFHE5025XA(C:N501) is tightened. No.8
3-5. KIYE50000022(I:N500) is tightened. No.9
Screw(E)
Screw(F)
Screw(H)
Screw(I)
Screw(B)
Screw(C)
Screw(B)
Screw(B)
Screw(B)
3.10. Affixation of Win Logo Label (XP), CENTRINO Label and Energy Star
Label
2 5mm
2
5mm
2
5mm5 7mm
Win Logo Label(XP)
CENTRINO Label
Energy Star Label
Top Case
In the inclination at the time of putting the win logo label,
the CENTRINO label and energy star label the both ends
difference is within 0.2mm
<Attention>
Confirm whether the paste of the label has overflowed
after the win logo label and putting of the CENTRINO label
and energy star label.
3-7