Filter
Top Products
3.5. Processing of DC-IN Cable and Coaxial Cable
The cable is processed to
the ditch of the bottom case
The cable is processed with
the boss between ribs
Confirm the terminal is vertical
Coaxial cable
3.6. Obtaining of Side Cover (L)
DC Jack Holder
the under hooks is hooked
the bottom case
the under hooks is hooked
the bottom case
Side Cover(L)
The upper part is shut with
lower hooks put on the
bottom case.
3.7. Processing of MODEM Cable and LAN Cable
LAN Cable
MODEM Cable
Insert LAN cable
previously
The cable is
processed with the
boss between ribs
USB Sheet
The USB sheet
is put and the
cable is held
Standard
The cable
must enter
in the set of
3-5mm
The state that the tension hangs is NG
Give slack
to the drawing
out part
3-5