Filter
Top Products
1.0 SOFTWARE INSTALLATION
Before installing the board, install and run InstaCal. This package is the installation,
calibration and test utility included with your board. InstaCal will guide you through
switch and jumper settings for your board. Detailed information regarding these
settings can be found below. Refer to the Extended Software Installation Manual for
InstaCal installation instructions.
2.0 HARDWARE INSTALLATION
2.1 INTRODUCTION
The CIO-SSH16 is a signal conditioning accessory board designed to improve the
performance of a multi-channel analog input board (such as the CIO-DAS16)
wherever channel to channel skew must be minimized. The CIO-SSH16 is shipped
with four channels installed but components for additional channels can be purchased
for up to 16 channels of signal conditioning. As an accessory, it is mounted external
to the PC. It may be placed in the open on your bench top or in a case.
Figure 2-1. Board Cabling
1
P18 to Analog Input Board