Filter
Top Products
RMON Support
MegaVision supports RMON Groups 1,2,3,9 for any RMON-capable device, which supports
the same groups via SNMP.
RMON Group 1 Statistics Window
You can enter this window from:
1. The Main Window Menu Bar (under Monitor: RMON Group 1 Statistics)
2. From the device window menu bar of certain devices.
Figure 29. RMON Group 1 Window.
• The selected device is displayed in the Device Name field, but you can select any
device on the map via the pull-down menu.
• Click the Intfs and Cnts buttons to open the RMON Group 1 Statistics per
Interface and Counters Graphs per Counter windows.
• The Segments Errors/Sec and Utilization % windows are updated every polling
interval.
• You can delete unwanted interfaces with the Delete button in the Control Table
Entries section.
• The buttons at the bottom of the graphs have the same function as those in the line
graphs window.