Filter
Top Products
IS1000 – Configuration Guide
38
START OF CONFIGURATION END OF CONFIGURATION
3.8. Standard 2/5
This symbology is numeric only and uses the same encoding system as the code
Interleaved 2/5 but only the bars are significant. The problem of reliability is also the same
in case of incomplete scanning of a code so it has to be used with fix length(s).
3.8.1. Number of Lengths Authorized
To fix the number of characters per length, read one (or two) bar code label(s)
having the desired length(s) after the decoder is turned on.
The length(s) are not saved after power-off.
3.8.2. Start/Stop Types
Two types of start/stop characters can be used, select the one corresponding to
your application:
ONE *
TWO
! Note:
WITH 3 BARS *
WITH 2 BARS
START STOP START STOP