Metrologic Instruments IS8000 Barcode Reader User Manual


 
28
A
PPENDIX
B
(
CONTINUED
)
P
ARAMETER
D
EFAULT
RS-232 RS-422
L
IGHT
P
EN
200 msec to find Supps
Code 128 Coupon Option
Code 128 Coupon Conversion
378/379 lock on supplement
Remote supplement required
MISCELLANEOUS
Beep after transmitting
Beep before transmitting *
Faster Beep/Same Tone
Lost Communication Timeout 3 beeps on timeout
razz beep on timeout 5 retrys before timeout
Support 'D/E' disable/enable commands
Support 'F/L' laser off/on commands
Enable MECCA
One Compare Buffer *
Two Compare Buffers
Four Compare Buffers
Eight Compare Buffers
Scan Count
Reverse LED convention
Support multiple beep 'B'/razz 'Z' commands
Support host BEL/CAN (cancel) command
Enter program mode only after power up
Enable status reporting
Number of good scans required (1-8) 1
Special code select
Normal volume *
Loud Volume
Support 'M/O' motor off/on commands
TRIAC/LINE SENSOR
Support Line Sensor
Support Line Sensor Alarm
Transmit 'No Read' message on sensor timeout
Scans per Sensor Activation (1-5)
Scan Duration (sec.)
Support Triac
Triac Controlled by the Host (DC2/DC4)
Triac Normally On
Enable Read and Match Mode