Filter
Top Products
www.apc.com / www.mgeups.com
THE UNINTERRUPTIBLE POWER PROVIDER
Network Shutdown Module V3 – User Manual - APC # 990-3630 (MGE # 34 003 934 XU / AB) Page 41/66
7.5.2 Customized installation package
After having customized the Network Shutdown Module configuration (name or IP address of Network
Management Card/Proxy, events and actions, etc.), you can build a Network Shutdown Module installation
package which contains your specific configuration.
You can then deploy this Network Shutdown Module configuration on other machines which have the same
operating system.
Note: Specific configuration include the UPS(s) IP address(es), the event and action, … but not the install
path or install mode.
Please proceed as follows to build the customized package (Windows or Linux):
Build customized package
ω In the Package section, click on the Build customized package button to build a customized package.
ω From the dialog box, then click on "OK".
ω A confirmation message is displayed when the package is built. You will find in this message the path and
the name of the new package.
ω Copy this package to the other machines in your chosen directory.
Note that the Customized installation package will be installed in default installation directory.
> Windows default value is C:\Program Files\MGE\NetworkShutdownModule
> Linux default value is /usr/local/MGE/NetworkShutdownModule
ω Execute the package (standard installation or Silent installation).
Important:
ω For Repackaging function, If you are running Debian Sarge or Redhat 3,4 , please read the FAQ first.
ω If you install a “customized package” on a computer where a “previous version” of Network Shutdown
Module is running:
=> The software version will be upgraded but the configuration of the “previous version” will be kept.
In order to replace a previous installation, you must first uninstall it.