Filter
Top Products
www.apc.com / www.mgeups.com
THE UNINTERRUPTIBLE POWER PROVIDER
Network Shutdown Module V3 – User Manual - APC # 990-3630 (MGE # 34 003 934 XU / AB) Page 13/66
2.4 Software Installation Procedure
This section informs on how to install Network Shutdown Module to protect the computer system.
Before starting the installation:
ω it is necessary first to install a Network Management Card in the UPS or the Mgt. Proxy on a server.
ω make sure you have the necessary administrator rights to install Network Shutdown Module (for Windows
and Linux).
ω it is assumed that you are aware of the installation prerequisites.
Follow these steps to install Network Shutdown Module in interactive (graphical) mode:
Connect to the MGE UPS SYSTEMS download area at http://www.mgeups.com/download/menu.htm
. Follow
the instructions to download Network Shutdown Module
or insert the Solution-Pac 2 CD-ROM (/HF).
From CD ROM:
ω At the first navigator screen select "Network Solutions" and follow the instructions
For Windows:
From the Web:
ω Execute the downloaded package.
From CD ROM:
ω Mount your CD-ROM (ex: /mnt/cdrom)
ω Open Default.htm from your internet browser to discover the solutions and select
"Network Solutions".
ω Follow the instructions
For Linux:
From the web:
ω Download and save the file to your computer.
ω Authorize the execution right on the downloaded package (through graphical interface)
or execute the command : chmod 755 nsm_linux_xx_3_xx_xx.run
ω To install execute the package (double click)
ω If necessary enter the root password
ω Follow the instructions
ω Choose the installation language. The selected language will correspond to the one of the installed
product.
ω Read and accept the License Agreement for MGE UPS SYSTEMS Software.
ω Choose the installation directory of the Network Shutdown Module.
> Windows default value is C:\Program Files\MGE\NetworkShutdownModule
> Linux default value is /usr/local/MGE/NetworkShutdownModule
ω Complete the installation.
ω After the installation,
> In the Configuration-> Power device screen,
Enter the default Login «MGEUPS» and default Password «MGEUPS»
Then click on the Add button and
Enter the IP address of the Network Management Card (or Proxy).
Save your configuration