Filter
Top Products
www.apc.com / www.mgeups.com
THE UNINTERRUPTIBLE POWER PROVIDER
Network Shutdown Module V3 – User Manual - APC # 990-3630 (MGE # 34 003 934 XU / AB) Page 25/66
4.4.2 Advanced tests
For test purpose, it is also possible to display the messages in verbose mode and check the content.
Messages in verbose mode:
ω Event log:
It is possible to consult the Event log
.
ω Advanced trace:
We warn you against the use of disk space for this Trace mode.
To validate verbose mode :
> in the bin/dae and bin/netsystray directory of the application, rename the file called debugMode.off
into debugMode.on,
> restart the MGE Network Shutdown Module - Acquisition engine as explained hereafter,
> view the trace in the file called traceDebug.txt in the same directory.
To stop verbose mode :
> in the bin directory of the application, rename the file called debugMode.off into debugMode.on,
> restart the MGE Network Shutdown Module - Acquisition engine as explained hereafter.
4.5 Start and stop the Shutdown Module (advanced)
(Warning, if you stop, your computer is not protected anymore).
Windows:
From the Windows services panel you can start and stop the 2 services that are created:
ω MGE Network Shutdown Module - Acquisition engine
ω MGE Network Shutdown Module - Web server
Linux:
ω In graphical mode, from your services panel you can start and stop the mge-nsm
service that is created.
ω In console mode, you can also run the following commands:
/etc/init.d/mge-nsm start
/etc/init.d/mge-nsm stop
/etc/init.d/mge-nsm restart