Filter
Top Products
www.apc.com / www.mgeups.com
THE UNINTERRUPTIBLE POWER PROVIDER
Network Shutdown Module V3 – User Manual - APC # 990-3630 (MGE # 34 003 934 XU / AB) Page 11/66
ω 4679 MGESupervision
ω 4680 MGEManagement (access through SSL)
These ports are reserved for MGE UPS SYSTEMS at IANA (Internet Assigned Numbers Authority,
http://www.iana.org/).
Proceed as follows:
ω Enter into Start -> Parameters-> Configuration Panel -> Windows Firewall
ω In the Exception tab, click on «add a port »
ω Enter the name « MGESupervision » the number « 4679 » the protocol « TCP »
ω Apply and perform the same operations for the next port
ω Enter the name « MGEManagement » the number « 4680 » the protocol « TCP »
ω Apply
If you use a Firewall with all ports closed by default:
To enable communication between Network Shutdown Module and Network Management Card:
ω Port 80 must be opened as a destination port (for output) on the machine hosting Network Shutdown
Module.
2.2.2 On the System that Displays Web-based Graphical User Interface
Important:
The Network Shutdown Module graphical interface can be accessed remotely using a simple Web browser.
Access to this interface is secured through SSL connection (default configuration) and must also be secured
through Login & password.
The Network Shutdown Module graphical interface has been tested with:
ω Mozilla Firefox 1.5 or 2.0 is recommended for better performance. (Firefox is mandatory for Linux)
ω Microsoft Internet Explorer V6, V7
Note: For the Web browser, we advise you against the use of the highest security level. Some configuration
screens are not useable.
Javascript and Cookies must be authorized for the selected security level.