Filter
Top Products
UNO-3074 User Manual vi
recommended by the manufacture. Discard used batteries accord-
ing to the manufacturer’s instructions.
14. This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
15. CAUTION:
Always completely disconnect the power cord from
your chassis whenever you work with the hardware. Do not make
connections while the power is on. Sensitive electronic components
can be damaged by sudden power surges.
16. CAUTION: Always ground yourself to remove any static charge
before touching the motherboard, backplane, or add-on cards. Mod-
ern electronic devices are very sensitive to static electric charges.
As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components on a static-dissipative surface or in
a static-shielded bag when they are not in the chassis.
17. CAUTION: Any unverified component could cause unexpected
damage. To ensure the correct installation, please always use the
components (ex. screws) provided with the accessory box.
Safety Precaution - Static Electricity
Follow these simple precautions to protect yourself from harm and the
products from damage.
1. To avoid electrical shock, always disconnect the power from your
PC chassis before you work on it. Don't touch any components on
the CPU card or other cards while the PC is on.
2. Disconnect power before making any configuration changes. The
sudden rush of power as you connect a jumper or install a card may
damage sensitive electronic components.