Milan Technology MIL-S3580 Switch User Manual


 
32
Figure 3-25. Port Based VLAN Configuration Menu
Port Based VLAN needs to be set in the Switch Device Control Menu before any
configuration in this menu takes effect. By default, the VLAN mode configuration
for the switch is IEEE 802.1Q. Once set to Port Based VLANs, all ports are on the
same VLAN by default. There can be up to 128 different port based VLANs
configured. These VLANs can be overlapping which means that one port can
belong to several different VLANs.
Select the VLAN entry to create, modify, or delete the VLAN group. Use <
Space
Bar> to check (join) port(s) to the VLAN group. When a port is joined to a VLAN, it
appears on the menu screen as (X). If the () is blank, the port does not belong to
that VLAN.