Milan Technology MIL-S3580 Switch User Manual


 
62
VLAN Configuration
Figure 4-20. Port Based VLAN Configuration Menu
(S) – Port(s) is set as static (fixed) member of the VLAN.
(
D
) – Port(s) is set as static (fixed) member of the VLAN and can be registered as a
dynamic VLAN member as well.
(C) – Port(s) is being both a static member and a dynamic member of the VLAN.
Port Based VLAN needs to be set in the Switch Device Control Menu before
configuring this menu will take effect. By default, the VLAN mode configuration for
the switch is IEEE 802.1Q. Once set to Port Based VLANs, all ports are on the
same VLAN by default. There can be up to 128 different port based VLANs
configured. These VLANs can be overlapping which means that one port can
belong to several different VLANs.
Static VLAN Configuration
When configuring the IEEE802.1Q VLAN, there are slightly different options
available when the port is configured on the console screen or the web browser. A
port on a VLAN can be in one of three different states.