Filter
Top Products
3
Before Making Prints
3-14 CF2001P
3.4 Power Switch
Turning the printer on and off
To turn the printer on
➜ Set the power switch to “1”.
To turn the printer off
➜ Set the power switch to “2”.
✎
Note
Do not turn off the printer while it is printing, otherwise a paper misfeed
may occur. Make sure that all print operations are finished before
turning off the printer.
✎
Note
With Fiery X3e installed, if the printer is turned off directly, instead of
turning off the system using the control panel, the controller may be
damaged.
✎
Note
If the printer is not used for 15 minutes, it automatically enters Energy
Saver mode.
The printer will automatically start warming up as soon as it receives
a print job, or when any cover is opened, then closed.