Filter
Top Products
5
Control Panel Messages
5-4 CF2001P
To load paper into Tray 1 (250-sheet multipurpose paper drawer)
1
Pull out the paper drawer.
?
Has the paper take-up roller
been touched?
➜ Be careful not to touch the sur-
face of the paper take-up roller
with your hands. If the roller has
been touched, wipe it with a dry
cloth.
2
Press down on the paper-lifting
plate until it locks into place.
3
Load the paper into the drawer so
that the front side of the paper (the
side facing up when the package
was unwrapped) faces up.
?
Have you loaded too much pa-
per into the drawer?
➜ Do not load so much paper that
the top of the stack is higher
than the Ä mark.
?
Has the paper been loaded correctly?
➜ Make sure to align the stack of paper.
?
Do you wish to load a paper size or type different from that previ-
ously loaded?
➜ For more details on changing the paper size and type, refer to
“Loading Paper” on page 4-7.
Paper take-
up roller