Filter
Top Products
8
8.5 When the Message “Cannot Staple.” Appears
8-30 Di2010/Di2510/Di3010/Di3510
Touch Panel Messages Chapter 8
8.5 When the Message “Cannot Staple.” Appears
To clear jammed staples
When a finisher is installed and the staples are jammed, the message shown below
appears.
Follow the procedure described below to clear the jammed staples.
Follow the procedure described below to remove the paper and staples.
✎
Note
When the message “Cannot Staple.” appears, clear the jammed staples as de-
scribed below.
Not following the following procedure and forcefully pulling out the paper may
result in damage to the “Stapler Unit”.
1 Remove all paper from the
finisher.