Filter
Top Products
5
5.5 Automatically Selecting the Paper Source
5-8 Di2010/Di2510/Di3010/Di3510
Copy Paper Chapter 5
5.5 Automatically Selecting the Paper Source
If the selected paper drawer runs out of paper while a copy job is being printed and
a different paper drawer is loaded with paper meeting the following conditions, the
other paper drawer is automatically selected so printing can continue.
If the optional large capacity cabinet (LCC) is installed, a maximum of 3,650 copies
(with Letter C paper) can be made continuously.
This feature is convenient when printing a large number of pages or making a large
number of copies continuously.
Operating conditions
● The paper is the same size.
● The paper is the same type.
● The paper is positioned in the same orientation.
When making a large number of copies continuously, load all paper drawers with
paper meeting the conditions listed above.
Order for Selecting Another Paper Drawer
When a different paper drawer is automatically selected, the next paper drawer in
the following list is chosen.
1st paper drawer → 2nd paper drawer → 3rd paper drawer → 4th paper drawer
→ Multiple bypass tray
✎
Note
When setting special media such as overhead projector transparencies or label
sheets into the Multiple Bypass Tray, the auto tray change function may be
started, and may supply the wrong paper.
We recommend that you make selections for special media in the User’s Choice
Special Settings. For details, refer to User’s Choice Settings in the Advanced
Operations volume of the User Manual.