Filter
Top Products
14
NOTE
• Do not feed the print paper more than 2 times. Doing so will not allow the number of prints
indicated on page 11 to be printed.
The installation of print paper and ink cassette is completed.
NOTE
An IC is built in the ink sheet. This is the IC chip, not a battery.
This IC can be thrown away as normal waste.
1
1
BEFORE OPERATION
2
2
Insert the ink cassette with the ink sheet into its compartment.
Put the ink cassette into the printer drawer as shown . Then, set the other side
(with handle) as shown right. When exchanging the ink cassette, remove it by
holding the handle. (See page 19.)
INSERT THE PRINTING UNIT
Push the printing unit until it is locked into place.
After plugging the power cord, press POWER button on the
front panel.
Press FEED & CUT button.
The print paper is automatically cut after feeding about 10 cm (4 inches).
Repeat the above step once or twice.
Feeding the print paper will eliminate fingerprints and dust during handling. The
printing unit is initialized.