Mitsubishi Electronics LVP-S120A Projector User Manual


 
23
ENGLISH
PC-CARD
The projector can play back an image by using the PC-
CARD.
Using the PC-CARD
Use only the flash memory card of PCMCIAATA com-
patible type II.
Due to PC-CARD type, some images can not be prop-
erly recorded. Please contact your dealer.
Setting up the PC-CARD
1. Set the projector into standby mode by pressing the
main power switch. The POWER indicator lights up
red.
2. Press down the PC card slot cover button to open
the PC card slot cover.
3. Make sure the PC card is
going to be inserted in
right side. The PC card
indicator will illuminate.
When the input source is set to
PC CARD, do not remove the PC card. The projector
may not work correctly.
Removing the PC-CARD
1. Press the RELEASE button on the remote control.
PC card eject icon will be displayed on the right
end of the screen.
The PC card indicator will auto turn off on the
projector.
2. Press down the PC card slot cover button and press
the eject button simultaneously.
3. Remove the PC card from the PC card slot.
Upon removing a PC card, wait at least 2 seconds
before inserting another.
The following manufacturers PC cards have been
confirmed to operate within this projector:
EPSON, TDK, Logitec, Panasonic, Verbatim, I-O
DATA, HAGIWARA, IBM, Mitsubishi (MF-Series).
Play back
1. Insert the prerecorded PC-card.
2. Press the CARD button.
The PC-CARD index display appears on the screen.
3. Press the $ or % button to select the desired im-
age.
If the PC-CARD is recorded by using the per-
sonal computer, select the desired group by press-
ing the + or - button.
4. Press the { or } button to enter the image dis-
play mode.
5. Press the $ or % button to display another
image.
6.
Press the VIDEO or RGB button to quit the PC-
CARD playback function.
7. Press the RELEASE button on the remote
control.
8. Press the eject button to take the card out.
During PC-CARD playback, the sound is
switched off.
Noise may occur momentarily when images are
updated via PC card.
The images recorded in BMP (not compressed)
will take a long time to playback.
It takes about 10 seconds to playback JPEG
compressed data.
When having an access of PC card as you want to
exchage images on PC card, there will be four red
line indicated at the edge of the screen.
If the PC card is ejected when playing back PC
card, the image will be switched to VIDEO
automatically.
During PC-CARD playback, if the incorrect
display appears, release and re-insert the PC-
CARD.
Playback picture taken by the digital camera
The image which has been recorded in PCMCIA/
ATA card, smart media or compact flash can be
playbacked. The PC card adapter is required to
playback smart media and compact flash.
Depending on the type of the digital camera, the
picture may not appear correctly. Please contact
your dealer.
PC card recorded by Digital Camera, the picture
will not be displayed on PC-CARD index display.