Mitsubishi Electronics LVP-S120A Projector User Manual


 
36
Indicators
The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your
dealer.
INDICATOR
TEMP
INDICATOR
SHOWS
blinking red
CONDITION
Unusual temperature
Normal
Lamp is almost used up.
Lamp is used up.
The power is not turned on.
(Power indicator lights up red.)
Standby
Power-on
The filter cover is not closed.
(When the TEMP indicator and
the LAMP indicator are off.)
Abnormal
(When the TEMP indicator
or the LAMP indicator-
steady on or blinking.)
Steady green
The power is turned off
and the POWER indicator
lights up red.
The ventilation slots or air
filter is clogged with dust
or debris.
The fan has stopped due
to an impediment.
The room temperature is
too high.
The filter is dirty.
POSSIBLE SOLUTIONS
Remove the object from
the ventilation slots.
Pull out the power
plug and remove the
object. If you cannot,
consult your dealer.
Relocate the projector
to a cooler place.
Clean the filter.
-
Replace the lamp.
Exchange with a new
lamp if the same
problem recurs.
-
-
LAMP
INDICATOR
Blinking red/green
or Blinking red
Steady red
Steady green
Steady red
Blinking red/green
or Blinking red
POWER
INDICATOR
Close the cover cor-
rectly.
Contact your dealer.
RGBLAMP
TEMP
CARD
SOURCE
MENU
ENTER
VIDEO
PC CARD
VOL