12
MC100 Series Rack Mount Computer MAN-RCKPC-001
To access the front panel components, unlock and open the panel door. Lo-
cated on the front of the Rack Computer are the following components.
HDD Active Indicator
Labeled HDD1, the first green LED indicator will illuminate when the Hard
disk drive is being accessed (is active). (HDD2 is not used)
Power LED
Next to the Power Control push button is a green LED indicator. It will illumi-
nate when the computer is on.
Mouse Port
PS/2-compatible mouse port. (There is also a mouse port on the rear panel,
but you can only use one port at time.)
Air Filter Tab
The system fan air filter can easily be removed, washed to remove contami-
nants, and then replaced. Simply pull the air filter retainer by the white plastic
tab (shown above) and slide filter out.
Power Control Switch
Use the Power Control switch to turn on the computer.
FRONT Panel Components
CDROM
DRIVE
FLOPPY
DISK DRIVE
RESET
BUTTON
POWER CONTROL
SWITCH
HDD ACTIVE LED
POWER LED
AIR FILTER TAB
MOUSE PORT
5 EXTERNAL COMPONENTS