Filter
Top Products
14
MC100 Series Rack Mount Computer MAN-RCKPC-001
5 EXTERNAL COMPONENTS
Located on the rear of the computer are the following components:
Power Connector
Connects to power cord.
Power Switch
Switches computer power to 115 or 230 VAC.
COM1, COM2
These serial port connectors are 9-pin male D-Sub type sockets. COM1 is a
dedicated RS-232 port. COM2 is a RS-232/RS-422/RS-485 port. The
manufacturer’s default for COM2 is RS-232. To select RS-422 or RS-485,
refer to manual MAN-ACZ85-001 for jumper settings.
Parallel Port Connector
Parallel Port (LPT1) is a 25-pin male D-Sub connector that is used to connect
to a printer.
Two USB (Universal Serial Bus) Connectors
There are two USB connectors located on the rear of the unit. Many devices
now use this type of connector (i.e., scanner, printer, mouse, etc.). One or both
may be used.
REAR Panel Components
POWER
CONNECTOR
POWER
SWITCH
SERIAL
PORTS
PARALLEL
PORT
USB
PORTS
ETHERNET
CONNECTOR
MOUSE
PORT
VIDEO
CONNECTOR
KEYBOARD
PORT
ISA/PICMG
SLOT
ISA
SLOTS
PCI
SLOTS