Filter
Top Products
18
MC100 Series Rack Mount Computer MAN-RCKPC-001
5. Insert the expansion card into the backplane connector and reinstall
the screw to secure the card’s end plate to the chassis.
6. Swing card retainer rail back into place and secure with screw.
7. Align the groove in the bottom of one of the retainer feet over the
edge of the card you have just installed.
8. Tighten retainer foot screw into the rail to secure the card.
9. Replace the housing cover, tighten the thumb screws, and then
reconnect the power source.
7 MAINTENANCE AND UPGRADES