Filter
Top Products
WARNING!
Programmable control devices such as Rack Computers must not be used as stand-alone protection in any
application. Unless proper safeguards are used, unwanted start-ups could result in equipment damage or
personal injury. The operator must be made aware of this hazard and appropriate precautions must be taken.
In addition, consideration must be given to the use of an emergency stop function that is independent of the
programmable controller.
The diagrams and examples in this user manual are included for illustrative purposes only. The manufacturer
cannot assume responsibility or liability for actual use based on the diagrams and examples.
Trademarks
This publication may contain references to products produced and/or offered by other companies. The
product and company names may be trademarked and are the sole property of their respective owners.
MEAU and/or AVG Automation disclaims any proprietary interest in the marks and names of others.
Manual P/N MAN-RCKPC-001
Designed, and Manufactured specifically for Mitsubishi Electric Automation, Inc., by AVG
Mitsubishi Electric Automation, Inc. (MEAU)
500 Corporate Woods Parkway, Vernon Hills, IL 60061
Phone: (847) 478-2100 • Fax: (847) 478-2253 • www.meauic.com
AVG Automation
Mitsubishi Approved IC Service Center
4140 Utica Ridge Rd. • Bettendorf, IA 52722-1327
Phone: 1-563-359-7501 • Fax: 1-563-359-9094 • www.avg.net
© Copyright 2003, AVG Automation
All Rights Reserved
No part of this manual shall be copied, reproduced, or transmitted in any way without the prior written
consent of AVG Automation. AVG Automation retains the exclusive rights to all information included in this
document.