Mitsubishi Electronics MIM-A01 Modem User Manual


 
AT+T Read - Reading a Stored Message
AT Commands MIM-A01 Appendix
8-20 MITSUBISHI ELECTRIC
AT+T Read=Number..
Lists the message with the indicated ID from the memory of the modem.
The message is not deleted and can be read as often as you want.
Number:
Number of the message to be read. This number can be determined using
the List command. To read the first stored message (that is the oldest),
enter a 0 (zero).
Response:
Short response
(AT+T Verbose="Off"):
+T Read= number, type, time
*message
OK
Comprehensive response
(AT+T Verbose="On"):
+T Read: Number, type, time
“ParameterList”
*message
OK
Message:
Text of the message.
Each text line of the stored message begins with *
ParameterList:
Additional Parameters - depending on message type.
Number:
Number of the message to be read.
Type:
SMS, Express E-Mail or Internet e-mail
Time:
Time stamp of the message
is set after successful receipt from the Tixi AT Modem.
Example:
An SMS message with the number 11 is read out:
AT+T Read = 11
Modem reply:
+T Read: 11, SMS, 2001/10/07,12:05:55
“From:071346768422; TimeStamp:2001/10/07,12:05:37"
*That is a message from Hans!
OK