Filter
Top Products
EN-14
HDMI IN
SERIAL
DVI-D(HDCP) IN
TRIGGER
COMPUTER IN/
COMPONENT
VIDEO IN
VIDEO IN
S-VIDEO
IN
PR/
C
R
PB/
CB
COMPONENT
VIDEO IN
AC IN
1
2
1
2
HDMI IN
SERIAL
DVI-D(HDCP) IN
TRIGGER
COMPUTER IN/
COMPONENT
VIDEO IN
VIDEO IN
S-VIDEO
IN
PR/
C
R
PB/
C
B
COMPONENT
VIDEO IN
AC IN
PB/CB
Y
PR/CR
PB/CB
Y
P
R/CR
HDMI IN
SERIAL
DVI-D(HDCP) IN
TRIGGER
COMPUTER IN/
COMPONENT
VIDEO IN
VIDEO IN
S-VIDEO
IN
PR/
C
R
PB/
C
B
COMPONENT
VIDEO IN
AC IN
Y
Component cable (option)
Connect one end of the optional video cable to the VIDEO
IN terminal of the projector.
Connect the other end of the video cable to the video
output terminal of the video equipment.
1.
2.
Also read the instruction manual of the equipment to be connected.
Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of NO SIGNAL
may appear on the screen when you change the channel via any channel that is not being received. In such a case,
set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its channel skip
function (that is a function not to display channels that are not being received) enabled.
Connecting to a DVD player or HDTV decoder
To connect this projector to video equipment that has component video output terminals, such as a DVD player, use
the COMPONENT VIDEO IN terminals.
•
•
The terminal’s names Y, P
B
, and P
R
are given as examples of when a HDTV decoder is connected.
The terminal’s names vary depending on the connected devices.
Images may not be projected correctly depending on the type of the DVD player you use.
Though it may take some time before an image is displayed on the screen depending on the type of the input
signal, such symptom is not a malfunction.
When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the SIGNAL
menu.
•
•
•
•
•
Connecting to a video player, etc.
To video output
terminal
Video cable (option)
S-video cable (option)
To S-VIDEO
IN terminal
To S-video
output terminal
To VIDEO
IN terminal
When the video equipment is equipped with the S-video
output terminal, make the connection as follows:
Connect one end of the optional S-video cable to the
S-VIDEO IN terminal of the projector.
Connect the other end of the S-video cable to the S-video
output terminal of the video equipment.
1.
2.
DVD player or HDTV decoder
Video player, or the like
Video player, or the like
Viewing video images (continued)