Mitsubishi Electronics HC5000 Projector User Manual


 
EN-24
Menu operation
Menus are not displayed when no signal is supplied to the projector.
IMAGE GAMMA MODE AUTO, SPORTS, VIDEO, CINEMA
USER1
REFERENCE SPORTS, VIDEO, CINEMA
USER2
ADJUST MODE
ALL, RED, GREEN, BLUE
CONTRAST ±30 HIGH ±10(R) ±10(G) ±10(B)
BRIGHTNESS ±30 MID ±10(R) ±10(G) ±10(B)
COLOR TEMP.
HIGH BRIGHTNESS
LOW ±10(R) ±10(G) ±10(B)
COOL
CONTRAST R ±60
MEDIUM
CONTRAST G ±60
WARM
CONTRAST B ±60
USER
BRIGHTNESS R ±60
COLOR ±10
BRIGHTNESS G ±60
TINT ±10
BRIGHTNESS B ±60
SHARPNESS *1 ±10
ADVANCED MENU
OK
SCREEN SIZE 16:9, CINEMA SCOPE(2.35:1)
AV MEMORY SAVE
AV MEMORY1
VERTICAL LOCATION ±26
AV MEMORY2
AUTO IRIS
AUTO IRIS 1, AUTO IRIS 2,
AUTO IRIS 3, OPEN
AV MEMORY3
TRNR *9 0 - 15
MNR *9 0 - 15
BAR *9 ON , OFF
CTI *1 0 - 5
INPUT LEVEL ±5
(for analog signal input)
INSTALLATION LAMP MODE STANDARD, LOW
AUTO POWER ON ON , OFF ENHANCED/NORMAL
(for digital signal input)
AUTO POWER OFF OFF, 5, 10, 15, 30, 60min
SPLASH SCREEN ON , OFF
BACK COLOR BLUE, BLACK
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
TRIGGER OUT ON , OFF ZOOM/FOCUS LOCK ON, OFF
TEST PATTERN
CROSS HATCH
LENS SHIFT LOCK ON, OFF
LENS LOCK
OK
LENS SHIFT RESET
OK
FEATURE ASPECT AUTO, 4:3, 16:9, ZOOM1, ZOOM2, STRETCH *4
PASSWORD FUNCTION
DISPLAY INPUT , MENU ACCESS
LOCK
OK
MENU POSITION
1 (Upper left), 2(Lower right)
UNLOCK
OK
MENU DIMMER ON, OFF
CINEMA MODE *2 AUTO , OFF
VIDEO SIGNAL *3 AUTO , NTSC , PAL , SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
SETUP *1 AUTO, OFF, 3.75%, 7.5%
SCART INPUT *8 ON, OFF
LANGUAGE
, English, Español, Deutsch, Français, Italiano, , , , PORTUGUÊS
RESET ALL
OK
SIGNAL HORIZ.POSITION *6 0 - 999 *4
VERT.POSITION *6 0 - 999 *4
FINE SYNC. *5, *6 0 - 31
TRACKING *1, *5, *6 0 - 999 *4
COMPUTER INPUT
*5
AUTO, RGB, YC
B
C
R
/ YP
B
P
R
OVER SCAN 100 - 90% *4
HOLD *5, *6 OFF BEGIN 0 - 99
ON
END *5 0 - 99
USER
OK
CLAMP POSITION *6 1- 255 *4
CLAMP WIDTH
*5, *6 1- 63 *4
INFORMATION LAMP TIME(LOW)
VERT.SYNC AUTO, OFF
INPUT
LPF *6, *7 ON, OFF
RESOLUTION
SHUTTER(U) 0 - 32
VERTICAL FREQUENCY
SHUTTER(L) 0 - 32
HORIZONTAL FREQUENCY
SHUTTER(LS) 0 - 95
SYNC. TYPE *5, *6
SHUTTER(RS) 0 - 95
* 1: Not available with certain signals.
* 2: Available only when the input signal is TV50, TV60, 480i, 576i or 1080i.
* 3: Available only when the input signal is from the VIDEO IN or S-VIDEO IN terminal.
* 4: Setting range differs depending on the input signals.
* 5: Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.
* 6: Not available when the input signal is from the HDMI IN or DVI-D(HDCP) IN terminal.
* 7: Available only when the input signal is 480i, 480p, 576i, or 576p.
* 8: Available only when the input signal is from the COMPUTER IN/COMPONENT VIDEO IN terminal.
* 9: Available only when the input signal is 480i, 480p, 576i, 576p, TV60 or TV50.